Key technical requirements for the operation and maintenance of polyurethane load-bearing wheels throughout their life cycle

1. Storage management specifications

When placed for a long time, place the wheels horizontally to avoid deformation of the rubber surface due to pressure

The storage environment must meet the following requirements:

▶ Temperature and humidity range: 10℃-30℃ / ≤65% RH

▶ Ultraviolet radiation intensity <50μW/cm²

▶ Keep away from strong acids (pH <2) and ester/ketone solvents

2. Operating environment control

Media contact restrictions:

▶ Prohibit contact with proton solvents such as acetic acid and butanone

▶ The pH value of the alkaline environment must be controlled within 8.0

It is recommended to install an electrostatic conductive device (surface resistance value ≤10^6Ω) to improve adhesion on slippery roads

3. Health monitoring system

4. Cleaning and maintenance procedures

Use anhydrous ethanol for surface decontamination, and prohibit the use of halogenated hydrocarbon solvents

Use low-temperature dry ice cleaning technology for entangled foreign matter to avoid mechanical scratch damage

Skystone Intelligent Equipment studies the load capacity of polyurethane wheels, optimizes the design scheme, and improves the reliability of the product during use, avoiding economic losses such as production stoppages due to the failure of polyurethane wheels, and helps to reduce tire size, reduce the height of vehicles such as AGVs, achieve equipment lightweighting and save material costs.